endurance_carpet_underlay_2019

Endurance 8mm Dense Rubber Carpet Underlay

£ 68.90 Product code: 1ZNDUR08_1382

Rolls or Sq Metres

Quantity

Endurance Serenity 8mm thick dense rubber underlay is suitable for virtually all heavy wear areas around the home and for many contract areas. It is also especially suitable for use on stairs and other concentrated wear areas and will maintain carpet apperance for longer.

With a tog rating of 1.40 and sound impact reduction value of 33 db it has a higher specification than comparative products such as Treadmore

*Colour may vary from batch to batch

SUITABILITY RATING - ALL HEAVY WEAR AREAS 

Underlay Type
Dense Rubber Crumb
Nominal Thickness
8mm
Density N/A
Thermal Insulation
1.40 tog est
Impact Sound Reduction
33 db est
Top Surface
Stitch Bonded
Bottom Surface
Coloured 
Comfort Rating
3/5
Suitability Living areas, stairs, bedrooms + Underfloor Heating Installations

UK madeE2

 

Roll Price (10 square metres) £53.90

Buy 2 Rolls - SAVE £15

Buy 3 Rolls - SAVE £30

Buy 4 Rolls - SAVE £45

Buy 5 Rolls - SAVE £60

Add additional square metres @ £5.74

Minimum order 1 Roll

VAT calculated at checkout

 

 

UO bannerE2

 

 

 

DELIVERY:-

Delivery to most UK mainland areas is FREE on orders over £50 with the exception of Scottish postcodes AB (all) IV (all) KW (all) PA20 upwards PH15 upwards where the delivery cost is £29.95

If your order is for £50 or less, the standard delivery charge is £14.95 to most mainland areas, excepting the Scottish postcodes shown above.

UNDERLAYS & ACCESSORIES:-

Most underlay and accessory orders placed before 3.00 PM Monday - Friday are usually despatched the same day and delivered within 3-5 working days, although we do recommend allowing a little extra time to allow for unforeseen circumstances. Outlying and remote areas may take a little longer, again do allow sufficient time.

Our delivery area is mainland England, Wales and Scotland ONLY.

FAQ's

How much underlay do I need?

Sometimes less than the amount of carpet needed. This is because when ordering a carpet you would normally choose the appropriate width available and there may be a little waste. But underlay is meant to be cut and joined, you can therefore order an amount closer to the actual size of the area.

How do I join underlay?

It is always best to tape joins to avoid movement, both during and after installation. A cloth single sided tape is best, but a budget priced tape will often suffice.

Which way up do I lay the underlay?

If there is a printed side, then this is usually laid uppermost. If there is no printing, but one side is relatively plain and the other side coloured, it is usually the plain side uppermost. If the underlay has a paper backing, this is laid uppermost.

 

 

 

 

 

Secure Ordering

2048 Bit encryption
godaddy
 

Secure Payment

We accept payments by
btm2E